Detailed Product Description

offset printing ink, the rsin offset printing ink , High-glossy and quick-set offset printing ink

 it is developed to satisfy market requirements, adapting to the current four-color, two-color, single color offset presses and so on. It can be applied on the copper paper, offset paper, cartoon paper (including glass glossy paper, coated white board paper) and other kinds of paper to print vivid pictures.

Product Features:

1.      Vivid, pure, high concentrations, can meet with requirements of high color density

2.      Dry fast and Set swiftly, good adhesion, Can adapt to 12,000 per hour printing speed

3.      The balance between ink and water performs well, so it is suitable for various offset press with different water supply system. The ink printing ability in the printing presses stays stable

4.  Being cut at high-speed, the ink body varies little, keeping the printing picture integrated and beautiful.

No. And Name

               Four primary colors                           Other available colors

BSH-130 Process Magenta       BSH-133 Bronce red      BSH-231 light yellow          BSH-332 Peacock blue

BSH-131 Rhodamine red         BSH-135 Red            BSH-232 Process Yellow      BSH-336 Deep blue

BSH-132 Deep red              BSH-136 Deep red        BSH-233 Deep yellow         BSH-337 Reflex blue

BSH-230 Yellow                BSH-236 Orange          BSH-631 Green              BSH-731   cyan blue

BSH-333 Process Red          BSH-535 Process Black

Description

1The use range                            

Printing Paper                    applicability      

1 High-grade coated paper          ok        

2 Generally coated paper            ok     

3 Super offset paper                ok

4 General offset paper               ok

5 White cardboard, white paper       ok

6Paper with non-absorbent surface    no

2Caution     

1Under normal printing conditions, not need to adjust

2)  In low-temperature environment or printing on non-coated paper, please add some viscosity reducer and varnish according to the printing condition.

3)  For drying, under normal conditions, no need to add dryer. If really need, please control the amount

Technical data       

Remarks: Viscosity measuring: ink-o-meter 400rpm, water temperature 38

Fluidity measuring: spread-o-meter, measure the diameter 15 minutes later

Drying time measuring: 25, the time for case hardening on glass

Setting measuring: Use ink proofing press, and then measure in ink setting tester

Light resistant: total 8 degrees. Degree 8 the greatest, degree 1 the weakest